2024 Land Pride WC1504
Call for Price
Key Features
Availability
Brochure
Year2024
MakeLand Pride
ModelWC1504
Product Features
Description
Land owners can utilize a Land Pride WC1504 Wood Chipper and their subcompact tractor to quickly turn mountains of limbs into chips for mulch or just to aid in decomposition. Driven by the tractor's PTO, this unit features a self-feeding 4" cutting capacity, four reversible and replaceable hardened-steel knives, adjustable discharge chute, and direct drive to rotor. Adjustable support stands help elevate the Wood Chipper to match the height to your tractor's output shaft, enabling the driveline to remain straight and level.
Features
- Quick Hitch Adaptable: Quickly and easily attach chipper to tractor with one person.
- 1/4" Thick Rotor Knife: Rotor features 4 replaceable 1/4" hardened steel cutting edges.
- Rotor Knives Can Be Rotated When One Cutting Edge Is Worn: Each rotor knife has two cutting edges to extend rotor knife life. When one edge is worn, rotate rotor knife 180 deg. to a new cutting edge. Less downtime required to sharpen rotor Rotor Knives Are Replaceable Can replace rotor knives when all cutting edges are worn out.
- 4-bolt Flanged Bearings: Improves bearing life.
- Cat. 4 Shear-bolt Driveline: Shear-bolt protects the unit when obstructions are encountered.
- Adjustable Rotating Discharge Chute With Rotation Stops: Directs direction wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator feeding product toward the feed chute.
- Skid Extension Supports: Allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints.
- Adjustable Deflector Chute: Helps control the distance wood chips will be discharged away from the Wood Chipper.
- Self-feeding System: Product is pulled in by the sharp cutting edges with each pass of a rotor knife. Operator can be retrieving the next object to load while the unit is chipping the last limb loaded into the feed chute.
Specifications
- Horsepower Required: 20 to 50 hp (Minimum 35 hp for maximum capacity)
- Weight: 450 lbs.
- Upper Hitch Plate Thickness: 5/16"
- Hitch: Cat. l w/ Quick Hitch capabilities
- Main Frame Thickness: 3/16"
- Rotor Housing Thickness: 3/16"
- Driveline Category: Cat. 4 with shear bolt
- Power Take-off Speed: 540 rpm
- Rotor Speed: 540 rpm (Direct Drive)
- Rotor Size: 25"
- Chip Capacity: 4"
- Hopper Inlet Opening: 20" x 20"
- Chipper Inlet Opening: 10" x 4"
- Spout Discharge Opening: 5 1/4" Square
- Rotor Knife: Reversible and Replaceable
- Number Of Rotor Knives: 4
- Rotor Knife Size: 6" x 2" x 1/4"
- Rotor Knife Material: Hardened Steel (Specifically designed for chipping)
- Feed System: Self-feed
- Feed Height Above Ground: 24" to 30" With adjustable stands
- Feed Height Adjustment: 6 Settings (Includes without adjustable skids)
- Chip Chute Position: 270 degrees
- Discharge Height: 58" to 64"
- Color: Orange, Green & Beige
General
| Chipping Capacity | 4 in. |
| Weight | 450 lb. |
| Recommended HP | 20- 50 HP (Minimum 35 HP for maximum capacity) |
