2024 Land Pride PD35
Call for Price
Key Features
Availability
Brochure
Year2024
MakeLand Pride
ModelPD35
Product Features
Description
The Land Pride PD35 Series Post Hole Digger is designed to meet the industrial duty applications of landscapers, construction companies, nurseries, ranchers, and farmers. The PD35 is designed for Category 1 or 2 three-point attachment and offers a 48" auger length and 9", 12", 15", 18" or 24" auger flights with cast steel fishtail tips.
Features
- Cat. 1 or 2 Hitch: Fits a wider variety of tractors by fitting Cat. 1 & 2.
- 2 7/8" Yoke: 3/16"+ Wall thickness for strength.
- 3 1/2" Reinforced boom: 7/32" Wall with 3/8" x 2" bar for strength.
- Auger flighting: Constant thickness on 1/4" flighting vs. tapered.
- Replaceable hardened steel points on auger: Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged. Cast steel auger fishtail tips.
- Gearbox Horsepower rating: 35 Series: 30-75 horsepower.
- 2" Output shaft: Fits most other auger manufacturers for users who don't need a new auger.
- Cat. 3 driveline with shear-pin or optional radial pin clutch: Protection against obstructions. Radial pin works like a ‘ratchet' to continually put driving force on the auger in tough conditions.
- 5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
- Large selection of augers: Variety of Dirt Auger and Rock Auger sizes and styles to suit many applications.
- Alignment handle (optional): Guide the auger from the tractor seat.
- Large selection of Bolt-on Rock Heads (accessory): All sizes of Land Pride PD25 and PD35 Pengo Dirt Augers can be converted to Rock Augers with this accessory.
- Down pressure kit (optional): Allows additional force to be supplied, hydraulically, to the beam to help force digger into the ground.
- Post Hole Digger stand (optional): Bracket mounted to bottom of gearbox can incorporate a Post Hole Digger stand. This allows operator to hook up and unhook from tractor more safely. Stand supports unit and will store unit when it is not on the tractor.
Specifications
- Weight without auger: 233 lbs (105.7 kg)
- Tractor horsepower range: 30 to 75 horsepower (22.4 to 55.9 kw)
- Auger length: 48" (1.22 m)
- Auger flight thickness: 1/4" (6 mm)
- Auger pipe: 2 1/2" (6.4 cm) ID
- Number of teeth: (6" (15.2 cm) - 2 teeth) (9" & 12" (22.9 cm & 30.5 cm) - 4 teeth) (15" (38.1 cm) - 5 teeth) (18" (45.7 cm) - 6 teeth) (24" (61.0 cm) - 8 teeth)
- Auger tooth construction: Forged, individually replaceable 40 Degree angle installed on flat side 50 Degree angle installed on angled side
- Pilot: Cast steel, 3 drill points
- Driveline Cat.: Cat. III shear bolt - standard; Cat. III radial pin clutch - optional (Recommended on auger sizes 15" (38.1 cm) and above.)
- Maximum operating power take-off Speed: 300 rpm
- Gearbox: 1 3/8" (3.5 cm) 6B spline input shaft 4:1 Ratio
- Output shaft: 2" (5.1 cm) O.D. Round
- Gearbox oil capacity & type: 9.1 Pints (4.31 L) of SAE80-90W EP oil
- 3-Point hitch Cat.: Cat. I & II
- Boom: 3 1/2" (8.9 cm) O.D.
- Yoke: 2 7/8" (7.3 cm) O.D.
Options and Accessories
- Auger extensions (accessory): 7" & 14" (17.8 cm & 35.6 cm) Extensions Available
- Dirt auger sizes (option): 6", 9", 12", 15", or 18" (15.2 cm, 22.9 cm, 30.5 cm, 38.1 cm, & 45.7 cm)
- Bolt-on rock head (accessory): 6", 9", 12", 15", or 18" (15.2 cm, 22.9 cm, 30.5 cm, 38.1 cm, & 45.7 cm)
- Rock auger sizes (option): 6", 9", 12", 15", or 18" (15.2 cm, 22.9 cm, 30.5 cm, 38.1 cm, & 45.7 cm)
- Tree auger size: 24" (61.0 cm)
- Cat. III torque limiter driveline: Available
- Hydraulic down pressure kit: Available
- Storage stand: Available
General
| Boom | 3 1/2 in. (8.9 cm) O.D |
| Auger Size | 6 in., 9 in., 12 in., 15 in., or 18 in. (15.2 cm, 22.9 cm, 30.5 cm, 38.1 cm, & 45.7 cm) |
| Gear Reduction | 4:1 Ratio |
| Weight | 233 lb. (105.7 kg) without auger |
